POLYBIT Polycrete MC
High strength free flowing micro concrete

One bag (25kg) of Polycrete MC requires 2.75 - 3.25L of clean potable water. In hot climates, the use of cold water (< 25°C) is recommended. Mix in a suitable size drum using an approved grout paddle at a slow speed (300/400 rpm) with a heavy-duty drill. Pour required amount of water in the mixing vessel followed by Polycrete MC. Mix for 3 minutes to get a homogeneous and consistent mix. The mixed material should be placed within 30 minutes. It can be poured or pumped in to the repair area to fill the cavity at the required level. No vibration is required. After concrete has initially set, the surface may be finished to the desired texture. Due to the presence of rapid drying polymers, the repaired area shall be cured in accordance with good concrete curing practice. curing shall be done by non degradable type of curing compound or wet hessian cloth. When cured with wet hessian cloth, the area shall be covered immediately with a high density polyethyelene sheet which shall be taped to all edges.