Skip to Content
Recent searches
      Polyzinc packshot

      Epoxy-coatings (special liquids)

      POLYBIT Polyzinc
      Zinc epoxy corrosion protective coating

      Single component zinc rich epoxy coating for the protection of steel reinforcement and metalwork against corrosion.
      • Excellent corrosion prevention properties
      • Quick drying, can be over coated after a short period
      • Excellent adhesion to stee

      TDS (1)

      SDSS (2)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYZINC is a protective coating to steel reinforcement in concrete repair applications – as a primer for steel surfaces prior to final coating.
      Available pack size: 1L
      • Excellent corrosion prevention properties
      • Quick drying, can be over coated after a short period
      • Excellent adhesion to stee
      • Services as primer for various maintenance systems
      • The zinc content provides an Electro chemical protection
      Polyzinc packshot
      Polyzinc packshot

      How to Use

      SURFACE PREPARATION

      All the corroded steel on the repair area should be fully
      exposed and all loose particles along with rusted scales
      shall be totally removed. Steel should be cleaned to a
      bright condition especially at the rear of the exposed bars
      by wire brushing or grit blasting. Ensure the surface is clean
      and dry and clear of oil, grease, dust etc.

      MIXING

      Mix the contents of the pail with a paddle mixer fitted
      to a slow speed drill to remove any sediment prior to
      application.

      APPLICATION

      Application can be done by brush. Ensure that the entire
      steel is coated properly. A second coat is recommended to
      be applied so that all pin holes are covered completely. The
      second coat shall be applied only after first coat dries off
      completely. The application of repair mortars should start
      immediately after the coating dries.

      Frequently asked questions

      It is a single component zinc epoxy corrosion protective coating

      Yes. It can be applied on steel reinforcement bars and steel structures

      Yes it is compatible with cementitious and epoxy repair products

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/flooring-others/product#/polybit-polysolvent/SAP_0201TZP34GO4/searchResult.productFields.MainImageAltText}
        POLYBIT Polysolvent

        Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polyzinc IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited