Skip to Content
Recent searches
      Polycure AC packshot

      M&A others

      POLYBIT Polycure AC
      Acrylic based concrete curing compound

      Acrylic based concrete curing compound used to prevent rapid evaporation of water from fresh concrete ensuring uniform hydration, adequate strength development.
      • Dual protection as curing and sealing compound
      • Protects concrete from water borne chlorides, sulphates and atmospheric carbon dioxide
      • Economical, Labour saving, Easy to apply

      TDS (1)

      SDSS (2)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYCURE AC is suitable for use on all concrete surfaces and acts as a more effective and economical alternative to separate curing, priming systems; in high rise construction where continuous wet curing is not possible; in areas subjected to high drying winds which require continuous curing; surfaces, which requires subsequent finishes. Available pack size: 20L drum, 200L drum.
      • Dual protection as curing and sealing compound
      • Protects concrete from water borne chlorides, sulphates and atmospheric carbon dioxide
      • Economical, Labour saving, Easy to apply
      Polycure AC packshot
      Polycure AC packshot

      How to Use

      Surface Preparation

      Mix the contents of the drum thoroughly prior to the application in order to remove the sediments. It is recommended that the curing compound is applied immediately after the initial bleed water evaporates and the concrete has achieved its initial set. In case of deshuttering, the concrete surface is wetted with water but not with free standing water, before the curing compound is applied. The application can be done by a brush, roller or an airless spray at a coverage rate of 5m²/L. For highly porous surfaces, a second coat has to be applied at the same coverage rate.

      Application

      Polycure AC acts as a primer and bonding agents for the following systems:
      – water based emulsion paint systems containing PVA,PVC, and acrylic co-polymers
      – tile adhesives based on the above polymers
      – bitumen based emulsions or solutions
      – cementitious systems
      Note:
      – concrete curing compound will effectively prevent evaporation of water from concrete, provided it is not puctured or damaged, but will not allow the ingress of water to replenish that is lost by self desiccation.
      – where water curing is inconvenient or potable water for curing is not available, sealing fresh concrete surface with curing compound is the best alternate curing method.

      Finishing

      Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened conditions and if stored as per recommendations. Excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce
      its shelf life.

      Frequently asked questions

      No. It is not white pigmented

      Yes. It is a chlorine free product

      Yes. It is stain free

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/coatings-special-liquids/product#/polybit-polycure-acw/SAP_0201WRP346Y2/searchResult.productFields.MainImageAltText}
        POLYBIT POLYCURE ACW

        Non-degradable liquid type of curing and sealing compound based on acrylic and proper wetting agents. 
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/industrial-flooring-wear-and-top-coating/product#/polybit-polypoxy-fc/SAP_0201TRP34GK5/searchResult.productFields.MainImageAltText}
        POLYBIT Polypoxy FC

        A two component solvent free epoxy based floor and wall coating that provides a durable and impervious coating. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-st/SAP_0201VLP34GH1/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete ST

        Polymer modified high strength cementitious repair mortar. Polymer modified repair mortar, specially formulated by blending OPC with non shrinking additives, fibers, polymers and fillers for repairing of beams, columns and slabs. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polycure AC IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited