POLYBIT Polypoxy BF

Epoxy repair putty and blow hole filler

  • Thixotropic. Can be applied on vertical surfaces
  • Good resistance to acids, alkalis, hydrocarbon fuels, oil and grease, solvents and sea water
  • High strength

Features and benefits

It is a two component, solvent free, epoxy based repair putty and mortar for concrete surfaces. The epoxy putty consists of graded fillers and non-sagging agents. It is designed for filling of blow holes, cracks and minor imperfections on concrete surfaces.

Properties

Description

POLYBIT® POLYPOXY BF is used for a filling of blow holes, cracks, and surface imperfections up to 5mm; A skim coat/filler on prepared floors prior to application of finish coatings and screeds; Repairing damaged concrete, crack filling, leak proofing on horizontal; A jointing compound; for fixing tiles on heavy duty areas, bedding bridge beams or bridge bearing and for grouting; A bonding agent. Available pack size: 3kg kit.

Documents and downloads

How to use

SUBSTRATE PREPARATION

Clean the concrete surface of all loose particles, laitance, dust, oil, grease, paint etc. Grit/captive blasting and mechanical grinding of the concrete floor is recommended for removing all surface contaminants.

APPLICATION

Polypoxy BF Part A and Part B shall be mixed thoroughly using a proprietary paddle mixer fitted to a slow speed drill till a uniform color and consistency is achieved. It is recommended to mix an entire kit at a time. However, for small repairs, part mixing can be done provided both the parts are accurately measured by weight. Application can be carried out by a steel trowel or putty knife or scraper. Press firmly the mixed mortar into the area to be filled to ensure proper adhesion and full contact. The epoxy putty shall be applied at a maximum thickness of 5mm in one layer. Additional layers should be applied after the applied mortar achieves its initial cure. The area repaired with Polypoxy BF can be over-coated with any epoxy or polyurethane coating after it achieves its initial cure. 

STORAGE & SHELF LIFE

The pails shall be stored in a covered and dry area. In tropical climates the product should be stored in an airconditioned environment. The shelf life of the product in unopened condition is 12 months from the date of manufacture. Exposure to sunlight, UV, sources of heat and humidity will result in the deterioration of the product and reduce its shelf life. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polypoxy-nf/SAP_0201WUP34GK8/searchResult.productFields.MainImageAltText}
    POLYBIT Polypoxy NF
    Easy to use non-flowing, sand filled two component epoxy compound which can be used for bedding, gap filling, repair and adhesive applications. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polysolvent/SAP_0201TZP34GO4/searchResult.productFields.MainImageAltText}
    POLYBIT Polysolvent
    Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
    POLYBIT Polyprime EP
    It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 

Frequently asked questions

No primer required

3 kg kit can cover approximately 2 sqm at 1mm thickness

It can be applied up to 5mm/layer