POLYBIT Polysolvent

Solvent Based Cleaning & Etching Compound

  •  removal of oi
  • Suitable for cleaning floors of garages

Features and benefits

Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces.

Properties

Description

POLYBIT® POLYSOLVENT can be used in For the removal of oil, grease, wax, mortar stains and fungi from brick work, concrete, asbestos, ceramic tiles etc. 4 Suitable for cleaning floors of garages, factories, warehouses and general construction sites.
Available sizes: 5L, 20L

Documents and downloads

How to use

Surface Preparation

Clean the surface well with a wire brush. Remove all loose particles, excess contamination and unwanted materials. The entire surface must be dust free and clean.

Application

To prevent the damage and discoloration try a sample of high contamination may need more than one treatment using POLYSOLVENT. In cases where POLYSOLVENT is used as an acid etch for epoxy coating; scrub the surface with a wire brush 

Finishing

Wait for 10 minutes, and then wash thoroughly until all traces of Polysolvent is removed. Allow to dry, prior to epoxy application. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
    POLYBIT Polyprime EP
    It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete FC
    Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 

Frequently asked questions

It is cleaning solvent used for the removal of oil, grease, wax, mortar
stains and fungi from brick work, concrete,
asbestos, ceramic tiles etc.

No. Cleaning should be done at wet condition

Not recommended for any other purposes