- Easy to use non slumping
- good impact resistance
- nor primer or bonding agent required
-
Easy to use non slumping
-
good impact resistance
-
nor primer or bonding agent required
-
high compressive strength
POLYBIT® POLYPOXY NF can be applied in as concrete repair: repairing damaged concrete, filling of cracks. as a skim coat/filler on prepared floors prior to application of floor coatings and screeds, as jointing compound: can be used to join pre cast concrete / GRC structures. as a bedding material: can be used for fixing tiles on heavy duty areas, bedding bridge beams or bridge bearing. excellent for anchoring bolts or replacement rebar and filling bolt pockets. Available sizes: 3KG
Clean all the surfaces and remove any loose particles,
laitance, dust, oil, grease, paint etc. Abrade the bond area
to improve mechanical bond.
Polypoxy NF part A and part B shall be mixed thoroughly
using a trowel or gloved hand until a uniform color and consistency is achieved. For small mixes, ensure that both
the parts are mixed as per the ratio of 60:40 (A:B).
Application can be carried out by putty knife, trowel or wooden float. Press firmly to ensure proper adhesion and full contact. Additional build up can be done by multiple layer application. Thickness can be from 0mm - 5mm. The application of additional layers should follow between 8 - 24 hours after the first application.
No primer required
It can be applied up to 5mm/layer
3 kg kit can cover approximately 1.6 sqm at 1mm thickness