Skip to Content
Recent searches
      Polypur LMP packshot

      Single ply - systems

      POLYBIT Polypur LMP
      Line marking paint for roads and parkings

      Line marking paint based on a modified acrylic/chlorinated rubber hybrid.
      • Quick drying
      • Durable
      • Easy to apply

      TDS (1)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYPUR LMP is used as a line marking paint on: polyurethane and epoxy resin based car parks; concrete surfaces; asphalt; airport runways; school playgrounds and sports floors; factory and warehouse floors. Available pack size: 1L, 4L.
      • Quick drying
      • Durable
      • Easy to apply
      • Suitable for use in both internal and external conditions
      • Good abrasion resistance
      • Excellent resistance against oil, alkalis and hydrocarbon fuels
      Polypur LMP packshot
      Polypur LMP packshot

      How to Use

      Surface Preparation

      Concrete surface: Clean the surface of all dirt, oil & grease and other contaminants. If required wash the area completely with clean water. Allow the surface to dry. Asphalt/Tarmac: Clean the surface of all dirt and other contaminants. The surface can be washed with a detergent followed by rinsing with clean water. Allow the surface to dry. Polyurethane/Epoxy Coated surface: Clean the surface of all dust and other contaminants. For old coated areas use a detergent to clean the dirt followed by thorough rinsing with clean water.
      CAUTION
      – do not use any solvent for cleaning the surface.
      – do not apply the paint if the humidity is > 85% and the dew point is < 3°C since it will prolong the drying time.
      – do not apply the paint when rain or sand storm is imminent.

      Application

      Mix the contents of the pail thoroughly prior to application to remove any sediment. Polypur LMP can be applied with an airless spray, brush or roller. When applying with an airless spray, the tip of the nozzle should be 0.3- 0.4mm and applied at a minimum pressure of 2500 psi. Use Polysolvent to thin the coating for the airless spray application. The line marking paint can be applied at a coverage rate of 5 m2/L (200 micron WFT to get a DFT of 120 microns). The second coat if required to build up the thickness can be applied only after the first coat dries off completely (30 minutes @25°C).

      Finishing

      Store the material in a cool, covered dry and well-ventilated place. Due to its low flash point, extreme care needs to be taken to ensure that the pails are not exposed to direct sunlight and should be kept away from all sources of heat at all times. In tropical climatic conditions, the product has to be stored in an air-conditioned environment and protected from high humidity. The shelf life of the product is 12 months in unopened condition if stored as per recommendations. Exposure to high temperature and humidity will result in considerable deterioration of the product and reduce its shelf life.

      Frequently asked questions

      It is a line marking paint for roads and parkings

      White, Black & Yellow

      Yes. It is compatible with asphalt and concrete roads

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/flooring-others/product#/polybit-polysolvent/SAP_0201TZP34GO4/searchResult.productFields.MainImageAltText}
        POLYBIT Polysolvent

        Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces. 
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/flooring-primers/product#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
        POLYBIT Polyprime EP

        It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/industrial-flooring-wear-and-top-coating/product#/polybit-polypoxy-fc/SAP_0201TRP34GK5/searchResult.productFields.MainImageAltText}
        POLYBIT Polypoxy FC

        A two component solvent free epoxy based floor and wall coating that provides a durable and impervious coating. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polypur LMP IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited