Skip to Content
Recent searches
      ceresit uk 400 mea teaser

      Acrylic coatings (liquids)

      POLYBIT POLYTEX S
      Single component, acrylic based waterproof coating

      Superior grade, single component, acrylic based, waterproof coating with high elastomeric properties. It is durable, flexible and has a high level of resistance to weathering agents like UV, sunlight and rain.
      • single component easy to apply
      • Water based
      • elastometrical

      TDS (1)

      SDSS (4)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYTEX S can be applied : Concrete flat and sloping roofs , Corrugated sheets , External Facades of concrete structures , Waterproofing of car park decks, Underpasses, Protective coating on exposed reinforced concrete from carbonation & chloride attack.
      Available sizes: 20KG
      • single component easy to apply
      • Water based
      • elastometrical
      • Good barrier against chloride ion ingress
      POLYBIT polytex s frontside imea
      ceresit uk 400 mea teaser

      How to Use

      Surface Preparation

      All the substrates must be dry and free of dust, dirt, moss,
      oil, grease and loose particles. Metal surfaces should be
      rust free. This can be achieved by wire brushing or grit
      blasting. Unsound surfaces are to be removed and repaired
      with a suitable repair mortar

      Application

      A primer coat is required to seal the pores and stabilize the
      surface. Polytex Super diluted with 20% clean water. Polytex Super can be applied by
      soft bristled brush or roller. Apply the first coat of undiluted
      material at a coverage rate of 1L/m²/coat to get a Dry
      Film Thickness of 0.5 mm. It is important to ensure that
      each coat has to be cured totally.

      Finishing

      The second coat should
      be applied at right angle to the first at the same coverage
      rate, to ensure a full unbroken coating to the substrate. For
      improved results a non woven geo-textile membrane can
      be reinforced in to the first coat while it is wet at expansion
      joint areas and on the fillets in all corners.

      Frequently asked questions

      There is no special primer. Primer can be prepared at site by diluting this with 20% clean sweet water by volume.

      Yes. It is green product with very low VOC

      Yes. This product is UV resistant

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/acrylic-coatings-liquids/product#/polybit-polytex-grey/SAP_0201WPP346X2/searchResult.productFields.MainImageAltText}
        POLYBIT POLYTEX GREY

        Single component, elastomeric, acrylic waterproofing and protective coating. 
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/pu-coatings-special-liquids/product#/polybit-polythane-p/SAP_0201WVP345J6/searchResult.productFields.MainImageAltText}
        POLYBIT POLYTHANE P

        A liquid applied waterproofing and protective coating for concrete structures based on a hybrid polyurethane and free from coal tar and other hazardous ingredients. 
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/cement-slurries-flexible/product#/polybit-polyflex/SAP_0201WJP34GI1/searchResult.productFields.MainImageAltText}
        POLYBIT Polyflex

        A two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT POLYTEX S IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited