Skip to Content

POLYBIT POLYTHERM AC

Highly efficient, energy-saving flexible coating

  • Durable & provides high degree heat insulation properties
  • Very high emittance & reflectance properties
  • Excellent dirt pick-up resistance over longer period of time

Features and benefits

Water-based pure acrylic resin proving efficient thermal protection for the entire structure.

Properties

Description

POLYBIT® POLYTHERM AC applicable for: roofs, terraces, balconies, domes, etc; sandwich panels, corrugated sheets; refurbishing coating works on minerals surfaced waterproofing membranes; concrete facades. Available pack size: 20L pail.

Documents and downloads

How to use

Surface Preparation

All the surfaces must be cleaned and made free of dust, dirt, moss, oil, grease and other loose particles. All pot holes and surface defects shall be repaired with a suitable concrete repair mortar from the Polycrete* range. Polytherm AC does not require priming and can directly be applied onto the surface. In case of highly porous surface, a priming coat is recommended to seal the pores and stabilize the surface. The primer coat can be produced on site by diluting Polytherm AC 1 to 1 with water. Apply the primer coat @ 5m2/L and allow to dry.

Application

Once stirred, Polytherm AC should be immediately applied either by brush, roller or industrial sprayer. It is recommended that coating be applied in a minimum of two coats. Should not be applied if relative humidity exceeds 95%. Each subsequent coat shall be applied only after the previous coat dries off completely. After application the coating must be back rolled to reduce surface irregularities and improve bonding. 

Finishing

Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened condition and if stored as per recommendations. Excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycryl/SAP_0201WPP34GH2/searchResult.productFields.MainImageAltText}
    POLYBIT Polycryl
    Superior grade, single component; pure acrylic based waterproofing and protective coating for concrete & masonry surfaces. the coating is durable, flexible and has a high resistance to UV. The coating is suitable for both interior and exterior application. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polytex-s/SAP_0201WPP346X4/searchResult.productFields.MainImageAltText}
    POLYBIT POLYTEX S
    Superior grade, single component, acrylic based, waterproof coating with high elastomeric properties. It is durable, flexible and has a high level of resistance to weathering agents like UV, sunlight and rain. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polythane-p/SAP_0201WVP345J6/searchResult.productFields.MainImageAltText}
    POLYBIT POLYTHANE P
    A liquid applied waterproofing and protective coating for concrete structures based on a hybrid polyurethane and free from coal tar and other hazardous ingredients. 

Frequently asked questions

This is a water based pure acrylic resin coating

There is no special primer. Primer can be prepared at site by diluting this with clean sweet water in the ratio 1:1 by volume.

Yes. It is a UV resistant coating suitable for exposed applications