POLYBIT Polyflex S

Acrylic modified cementitious waterproofing coating

  • Factory produced and packed to avoid on site variations
  • Seals light weight aerated blocks.
  • Seals pre-cast joints.

Features and benefits

A two part acrylic modified cementitious flexible water proofing system, especially designed for continually immersed conditions.

Properties

Description

POLYBIT® Polyflex S for the total water proofing of water tanks both external and internal. Provides a good anti carbonation protective coating to exposed concrete structures, for coating on sea water structures, concrete reservoirs, lift walls and pits, water proof coating for roofs, domes, tunnels, swimming pools, lift wells, spillways, surge shafts, pre-cast slabs and other wet areas. Specially designed for permanent pondin. Available pack size: 12.5KG.

Documents and downloads

How to use

Surface Preparation

The surface must be clean and free from oil, grease, dust,
loosely adhering particles and any other contaminations.
The substrate to be coated with Polyflex Super must be
structurally sound. Cracks and pot holes are to be repaired
with Polycrete repair mortar prior to the application of the
system.

Application

Polyflex Super is supplied in two parts and pre-measured.
Only on site mixing is needed. Slowly add the powder
to the liquid and mix using a slow speed drill fitted with
a suitable paddle. Apply the mixed material on to the damp surface by a soft
bristled brush, roller or a suitable spraying machine. 

Finishing

Allow the first coat to dry considerably, which typically will be 4-5 hours at 35°C. Application of the second coat is to be done at right angles to the first coat. However, pre wetting the first coat is not required prior to the application of the second coat. Curing should be done immediately after the coating has attained its final set 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyflex/SAP_0201WJP34GI1/searchResult.productFields.MainImageAltText}
    POLYBIT Polyflex
    A two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyflex-combo/SAP_0201WJP345H1/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFLEX COMBO
    A two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyflex-t/SAP_0201WJP345H2/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFLEX T
    A superior grade, two - component, polymer modified cementitious waterproofing and protective slurry mortar for concrete. 

Frequently asked questions

Yes. This can be applied on damp surface. But not on waterlogged area

No. Minimum 72 hours curing needed from the last coat.

Yes. It is a non-toxic product.