Skip to Content


Epoxy primer and bonding agent

  • High bonding strength, ultimate bond strength is greater
    than cohesive strength of concrete
  • Moisture tolerant, can be applied on slightly damp
  • Non-shrinking

Features and benefits

It is an epoxy bonding agent and adhesive for the bonding of new concrete /render to old concrete. It does not shrink and can be applied on slightly damp areas as well.



POLYBIT® POLYBOND EP is used for a bonding old to new concrete; repair of concrete; old and worn concrete; glazed tile and bricks; engineered and semi engineered bricks; offshore and marine structures. Available pack size: 1L, 5L kit.

Documents and downloads

How to use


All surfaces must be structurally sound and clean. Remove traces of oil, loose particles, laitance, demolding agent, curing compound, grease, paint or bitumen. Smooth surfaces shall be abraded to get a mechanical key. If the concrete surface is not suitable or has disintegrated badly, chip off the degraded areas until a sound surface is obtained. New concrete should be cured until the shrinkage and moisture movement is the minimum.


Pour part ‘B’ hardener to part ‘A’ resin pail and mix thoroughly to get a homogenous color and consistency. Polybond EP may be applied evenly with a short haired brush or with a trowel. Place the screed /concrete or repair mortar immediately after application of Polybond EP to avoid contamination. If the bonding agent dries out, apply a fresh coat. 


Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened condition and if stored as per recommendations. excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polysolvent/SAP_0201TZP34GO4/searchResult.productFields.MainImageAltText}
    POLYBIT Polysolvent
    Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-mc/SAP_0201VLP34GH0/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete MC
    High strength free flowing micro concrete suitable to repair large volume of concrete repairs at thicknesses from 10mm to 250mm. 

Frequently asked questions