Skip to Content
Recent searches
      packshot front imea POLYBIT polyshield dpc hd mea

      Flooring others

      POLYBIT Polysolvent
      Solvent Based Cleaning & Etching Compound

      Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces.
      •  removal of oi
      • Suitable for cleaning floors of garages

      TDS (1)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYSOLVENT can be used in For the removal of oil, grease, wax, mortar stains and fungi from brick work, concrete, asbestos, ceramic tiles etc. 4 Suitable for cleaning floors of garages, factories, warehouses and general construction sites.
      Available sizes: 5L, 20L
      •  removal of oi
      • Suitable for cleaning floors of garages
      POLYBIT polysolvent frontside imea
      packshot front imea POLYBIT polyshield dpc hd mea

      How to Use

      Surface Preparation

      Clean the surface well with a wire brush. Remove all loose particles, excess contamination and unwanted materials. The entire surface must be dust free and clean.

      Application

      To prevent the damage and discoloration try a sample of high contamination may need more than one treatment using POLYSOLVENT. In cases where POLYSOLVENT is used as an acid etch for epoxy coating; scrub the surface with a wire brush

      Finishing

      Wait for 10 minutes, and then wash thoroughly until all traces of Polysolvent is removed. Allow to dry, prior to epoxy application.

      Frequently asked questions

      It is cleaning solvent used for the removal of oil, grease, wax, mortar
      stains and fungi from brick work, concrete,
      asbestos, ceramic tiles etc.

      No. Cleaning should be done at wet condition

      Not recommended for any other purposes

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/flooring-primers/product#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
        POLYBIT Polyprime EP

        It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete FC

        Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polysolvent IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited