Skip to Content
Recent searches
      عربي

      POLYBIT POLYASPHALT 60/70

      Penetration grade bitumen
      • Hot applied
      • Excellent barrier against penetration of water
      • Excellent resistance to chlorides and sulphates

      Features and benefits
      A penetration grade bitumen used as a paving grade bitumen used for the construction of roads and asphalt pavements. This is also used as a protective and waterproofing coating on concrete surfaces.

      Properties
      • Hot applied
      • Excellent barrier against penetration of water
      • Excellent resistance to chlorides and sulphates
      • Conforms to the following standards: ASTM D 946, AASHTO M 20, BS 3690

      Description

      POLYBIT® POLYASPHALT can be used in waterproofing below ground block work, concrete structures prior to back filling, road construction and maintenance of flexible pavements. Available sizes: 140KG.

      Documents and downloads

      TDS (1)

      How to use

      Surface Preparation

      The surface shall be cleaned thoroughly of all contaminants
      like dust, traces of curing compound, oil, grease. All
      surface imperfections and protrusions are to be removed
      and repaired. Structurally unsound and friable concrete
      must be removed and repaired with a suitable concrete
      repair mortar

      Application

      The bitumen being thermoplastic in nature requires initial
      heating in order to melt the bitumen in the supplied drum.
      Applied the hot melt bitumen with suitable means onto the
      concrete surface as per the required thickness 

      Related articles
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Roofing Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      View all

      Related products
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycoat-rbe-1000/SAP_0201WEP345G1/searchResult.productFields.MainImageAltText}
        POLYBIT POLYCOAT RBE 1000
        Emulsified bituminous coating modified with high content of Styrene Butadiene Styrene rubber, which dries to form a tough and seamless, flexible water and vapor proof protective coating. 
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycoat-rbe-15/SAP_0201WEP345G2/searchResult.productFields.MainImageAltText}
        POLYBIT POLYCOAT RBE 15
        Emulsified bituminous coating modified with 10% Styrene Butadiene Styrene Rubber, which dries to form a tough and seamless, flexible water and vapor proof protective coating. 
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
        POLYBIT Bituboard
        A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 

      Frequently asked questions

        It is a putty type material

        Filler for plaster, brick, stone, wood, before painting or other finishes

        Yes. It is compatible
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT
      عربي

      © 2024 Henkel Polybit Industries