SBS modified bitumen jellified emulsion

  • Cold applied
  • single component easy to apply
  • can be applied on damp substrates

Features and benefits

Emulsified bituminous coating modified with high content of Styrene Butadiene Styrene rubber, which dries to form a tough and seamless, flexible water and vapor proof protective coating.



POLYBIT® POLYCOAT RBE 1000Can be used for a wide variety of applications, which includes the following: waterproofing in wet areas such as toilets, kitchens etc. waterproofing & protective coating on concrete foundations & boundary wall footings. as damp proof membrane in sandwich construction. general vapor proof coating for both interior & exterior floors & walls. Avalaible sizes: 20L, 200L

Documents and downloads

How to use

Surface Preparation

The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil, grease. Light mechanical grinding/grit blasting/high pressure water jet may be used to clean the surface of all the contaminants depending on the degree of contamination on the surface to be coated.


t is highly recommended to apply a priming coat prior
to the application of the Polycoat RBE 1000 coating on
the substrate. The primer can be prepared in the site by
diluting Polycoat RBE 1000 with 20% water. Depending on the dry film
thickness required, apply the jellified emulsion. 2nd coat
shall be applied only after the previous coat dries off. 


Polycoat RBE 1000 coating should be protected from
getting damaged due to the ongoing site activities.
coating can be protected either by a cement sand
screed (50mm thick) or by an asphaltic protection board

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-st/SAP_0201VLP34GH1/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete ST
    Polymer modified high strength cementitious repair mortar. Polymer modified repair mortar, specially formulated by blending OPC with non shrinking additives, fibers, polymers and fillers for repairing of beams, columns and slabs. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete FC
    Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
    POLYBIT Bituboard
    A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 

Frequently asked questions

Substrate must be sound, free from dust, loose particles, oil, traces of curing coampound and any contamination. May be applied to damp but not waterlogged surfaces.

There is no special primer. Primer can be prepared at site by diluting this product with 20% by volume of clean sweet water.

No. It is a water based green product