Skip to Content
Recent searches
      Polyguard 101 packshot

      Coatings - special liquids

      POLYBIT Polyguard 101
      Acrylic aliphatic protective and anti carbonation coating

      Acrylic aliphatic based protective and anti carbonation coating for reinforced concrete and masonry surfaces. It consists of a single component pigmented coating ready for immediate site uses.
      • Highly durable
      • Excellent flexural and elastomeric properties.
      • High UV resistance and resistance to long term weathering effects.

      TDS (1)

      SDSS (2)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYGUARD 101 can be used as a protective coating for exposed concrete structures such as bridge decks, tunnels, reinforced fill panels, marine and coastal structures from chloride ions, sulphates, carbon dioxide and water, used to protect other cementitious and masonry substrates from aggressive marine and coastal environment. Available sizes: 20L.
      • Highly durable
      • Excellent flexural and elastomeric properties.
      • High UV resistance and resistance to long term weathering effects.
      • Available in various colors. Low maintenance cost.
      • Excellent barrier to various chemicals like CO2, chloride ions, sulphates, oxygen, water and other aggressive contaminants
      • Breathable and can allow moisture vapor to escape from the structure
      Polyguard 101 packshot
      Polyguard 101 packshot

      How to Use

      Surface Preparation

      The application temperature should be between 5°C to
      45°C. Application procedures may vary slightly depending
      upon site conditions. The general recommended guidelines
      for the application of the coating system is as follows:
      The surface must be structurally sound and free of oil,
      grease, dust and other contaminants which will affect
      the bonding.

      Application

      Apply a penetrative primer coat of Polyxane* to the
      prepared dry surface. For best results apply the
      primer @ 4-5 m²/L/coat. The first coat of Polyguard 101 is to be applied on the dry primer at the rate of 2.5 m2/L for 200 microns D.F.T. the
      coating can be applied with a brush, roller or an airless
      spray

      Finishing

      Apply the second coat at right angles to the first coat at the
      same rate. The second coat is to be applied only after the
      first is completely dry.
      Allow the coating to cure for a period of 7 days to achieve
      its full properties

      Frequently asked questions

      Yes. Solvent free epoxy based primer to be used

      It can be applied at a range of 4 to 20mm in single lay.

      Yes. This product is highly abrasion resistant

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/impregnations-special-liquids/product#/polybit-polyxane/SAP_0201WTP34GP1/searchResult.productFields.MainImageAltText}
        POLYBIT Polyxane

        It is a single component highly penetrating protective treatment for concrete, masonry and stone work. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete FC

        Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polyguard 101 IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited