Skip to Content
Recent searches
      packshot front teaser imea POLYBIT polyrelease

      Cement slurries flexible

      POLYBIT Polyflex S
      Acrylic modified cementitious waterproofing coating

      A two part acrylic modified cementitious flexible water proofing system, especially designed for continually immersed conditions.
      • Factory produced and packed to avoid on site variations
      • Seals light weight aerated blocks.
      • Seals pre-cast joints.

      TDS (1)

      SDSS (6)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® Polyflex S for the total water proofing of water tanks both external and internal. Provides a good anti carbonation protective coating to exposed concrete structures, for coating on sea water structures, concrete reservoirs, lift walls and pits, water proof coating for roofs, domes, tunnels, swimming pools, lift wells, spillways, surge shafts, pre-cast slabs and other wet areas. Specially designed for permanent pondin. Available pack size: 12.5KG.
      • Factory produced and packed to avoid on site variations
      • Seals light weight aerated blocks.
      • Seals pre-cast joints.
      • Non-Toxic, compatible with drinking water.
      • Anti carbonation protection.
      • Non corrosive to metal
      POLYBIT polyflex s frontside imea
      packshot front teaser imea POLYBIT polyrelease

      How to Use

      Surface Preparation

      The surface must be clean and free from oil, grease, dust,
      loosely adhering particles and any other contaminations.
      The substrate to be coated with Polyflex Super must be
      structurally sound. Cracks and pot holes are to be repaired
      with Polycrete repair mortar prior to the application of the
      system.

      Application

      Polyflex Super is supplied in two parts and pre-measured.
      Only on site mixing is needed. Slowly add the powder
      to the liquid and mix using a slow speed drill fitted with
      a suitable paddle. Apply the mixed material on to the damp surface by a soft
      bristled brush, roller or a suitable spraying machine.

      Finishing

      Allow the first coat to dry considerably, which typically will be 4-5 hours at 35°C. Application of the second coat is to be done at right angles to the first coat. However, pre wetting the first coat is not required prior to the application of the second coat. Curing should be done immediately after the coating has attained its final set

      Frequently asked questions

      Yes. This can be applied on damp surface. But not on waterlogged area

      No. Minimum 72 hours curing needed from the last coat.

      Yes. It is a non-toxic product.

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/cement-slurries-flexible/product#/polybit-polyflex/SAP_0201WJP34GI1/searchResult.productFields.MainImageAltText}
        POLYBIT Polyflex

        A two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis. 
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/cement-slurries-flexible/product#/polybit-polyflex-combo/SAP_0201WJP345H1/searchResult.productFields.MainImageAltText}
        POLYBIT POLYFLEX COMBO

        A two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis. 
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/cement-slurries-flexible/product#/polybit-polyflex-t/SAP_0201WJP345H2/searchResult.productFields.MainImageAltText}
        POLYBIT POLYFLEX T

        A superior grade, two - component, polymer modified cementitious waterproofing and protective slurry mortar for concrete. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polyflex S IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited