Skip to Content
Recent searches
      Polycoat 15L packshot

      Bitumen-thin coatings

      POLYBIT Polycoat
      Bitumen emulsion paint

      Emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.
      • Easy to apply
      • cold applied
      • adheres to concrete, metal, wood, cork etc

      TDS (1)

      SDSS (6)

      Certificate Public (1)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYCOAT is used for providing damproofing for below ground concrete structures which are above the water table. This can also be used as the protective coating for built-up roofing systems and other exposed surfaces. The coating is also used as a moisture vapor barrier on block works and concrete surfaces prior to cladding. Available sizes: 12L, 15L, 20L, 200L
      • Easy to apply
      • cold applied
      • adheres to concrete, metal, wood, cork etc
      • water based
      • versatile
      • anti fungal
      Polycoat 15L packshot
      Polycoat 15L packshot

      How to Use

      Surface Preparation

      The surface shall be cleaned thoroughly of all contaminants
      like dust, traces of curing compound, oil and grease. Primer is always recommended prior to coating as it
      not only penetrates into the concrete pores and seals
      the substrate. The primer coat can be made in the site
      by diluting the same bitumen emulsion with 20% water.

      Application

      Stir the contents of the drum thoroughly prior to application
      to remove any sediment. The application can be done
      with a roller, brush or airless spray. Apply the coating at
      a coverage rate of 1-4 m2/L/coat, depending on the dry
      film thickness required. For highly demanding situations,
      it is recommended to apply in multiple coats.

      Finishing

      The coating shall be protected from ongoing site activities
      and during backfilling from getting damaged by a 150
      micron polyethylene sheet.

      Frequently asked questions

      Substrate must be sound, free from dust, loose particles, oil, traces of curing coampound and any contamination. May be applied to damp but not waterlogged surfaces.

      There is no special primer. Primer can be prepared at site by diluting this product with 20% by volume of clean sweet water.

      No. It is a water based green product

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-st/SAP_0201VLP34GH1/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete ST

        Polymer modified high strength cementitious repair mortar. Polymer modified repair mortar, specially formulated by blending OPC with non shrinking additives, fibers, polymers and fillers for repairing of beams, columns and slabs. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete FC

        Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/protection-membranes/product#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
        POLYBIT Bituboard

        A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polycoat IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited