Skip to Content
Recent searches
      Bitutape 150 PVC packshot

      Bitumen-tapes (membranes, flashing)

      POLYBIT Bitutape 150 PVC
      Anti corrosive pipe wrapping tape

      A high performance anti-corrosive pipe wrapping tape designed for use on buried pipeline, pipe joints, fittings and tie bars where impact or stress is high.
      • Easy to apply
      • Excellent adhesion
      • High strength

      TDS (1)

      SDSS (10)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® BITUTAPE 150 PVC is a high performance anti-corrosive pipe wrapping tape designed for use on buried pipeline, pipe joints, fittings and tie bars where impact or stress is high.
      • Easy to apply
      • Excellent adhesion
      • High strength
      • Flexibility
      • Resistance to acid & alkali
      • Excellent impact resistance
      Bitutape 150 PVC packshot
      Bitutape 150 PVC packshot

      How to Use

      Surface Preparation

      Remove any dirt, oil, grease, rust by suitable methods.
      Remove any metal burrs or weld spatter. The minimum
      requirement for surface preparation of pipe/steel surface
      is by mechanical/power wire brushing to remove any
      rust scales. Grit blasting can also be done in heavily
      contaminated areas

      Priming

      Bitutape Primer* (solvent based bitumen primer) shall be
      used for priming the steel surface prior to the application
      of the wrapping tape. Stir the contents of the primer for
      1-2 minutes to remove any sediment. Apply the primer
      at the rate of 4-6m2/L with a brush or roller evenly to
      ensure complete sealing of all small undulations

      Wrapping

      Apply strips of tape 100mm wide
      along the weld beads and press firmly. Peel back 150 to
      300 mm of the release film and apply the tape, adhesive side, to the pipe. The angle of the tape must be such as
      to produce the specified overlap. Apply only sufficient
      tension to ensure good conformation avoiding air pockets
      and bridging. Ensure end lap area of at least 150 mm
      when splicing the tapes.

      Frequently asked questions

      750 micron PVC

      Yes. It is recommended using solvent based bitumen primer

      It can withstand up to 80°C

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/bitumen-thin-coatings/product#/polybit-bitutape-primer/SAP_0201WEP34GD5/searchResult.productFields.MainImageAltText}
        POLYBIT Bitutape Primer

        A premium quality, quick drying, solvented bituminious primer conforming to ASTM D 41, used for priming pipes prior to application, pipe wrapping tape systems. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Bitutape 150 PVC IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited