Special & dispersion grouts

CERESIT CE 47
Two-component, chemical-resistant epoxy mortar for installation and grouting of tiles and stones

Two components supplied in one container. Component A consists of an epoxy resin mixture, siliceous aggregates and additives. Component B consists of a mixture of
organic catalysts.

TDS (1)

CERESIT CE47

en_AE | application/pdf

SDSS (2)

We have you covered

Waterproof
Easy application and cleaning
Chemical resistance and mechanical attack

Description
How to Use

Product Description

CERESIT® CE 47 is a Two-component, chemical-resistant epoxy mortar for installation and grouting of tiles and stones. For the chemically and permanently resistant installation and grouting of ceramic tiles and stones, acid-resistant bricks, split
tiles, chipboards, porcelain, clinker slabs and synthetic resin
bonded slabs (Agglo marble etc). For installation and grouting
ceramic coverings in areas exposed to aggressive substances, e.g. in therapeutic baths, dairies, industrial kitchens, battery rooms, car washes, breweries, silos, animal housing, swimming pools, laboratories, spas, saunas and steam baths. For indoor and outdoor use, in permanently wet area sand brackish water.

Waterproof
Easy application and cleaning
Chemical resistance and mechanical attack
Vertical slip resistance
Internal and external applications

How to Use

Mixing

Add the hardener (component B-catalyst) contained in the plastic bag to the resin (component A) and mix with a low speed electric drill and stirrer (approx. 400 rpm) until the mixture is completely free of lumps. Scrape the sides and the bottom of the container, using a steel spatula, to make sure that all the paste is catalyzed.Hand mixing is not recommended. The two parts are pre-batched. Do not add water or solvents to improve workability.

Installation of tiles and grouting

CERESIT CE 47 is applied using the thin-bed method. The notch size of the trowel must be adapted to the respective tile or stone format in accordance with the local norms.Apply the CE 47 mixture with an epoxy grouting board to the dry and clean ceramic coverings, filling the joints completelyand without any cavities. Then remove any excess material by skimming it diagonally off the tile surface.

Cleaning

The grout work must be cleaned and finished while the product is still wet and in any case in the shortest possible time. Take care not to remove product from the joints or leave stains on the tile surface.

View all

Bitustick Cool

The Next Generation of Performed Bituminous Coatings
Foundations and Flooring Systems

Discover, feel and touch our systems, through our mockup simulation boxes
Wet Areas and Flooring Systems

Discover, feel and touch our systems, through our mockup simulation boxes
Polycryl FR

The Ultimate Fire Rated Coating Solution
Polycryl PF

Strong UV protection For Polyurethane Foam Roof
Bituplus Ultra

The Ultimate Torch On Membrane Range

Sketch and drafting of a cozy house becoming real

CERESIT CE 47 IS PART OF OUR BIM MODELS

Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.

FIND OUT MORE

CERESIT CE 47 Two-component, chemical-resistant epoxy mortar for installation and grouting of tiles and stones

Documents