Skip to Content
Recent searches
      mea polybit tds polybit polyprime r en mea

      Fortifiers

      POLYBIT Polybond PVA
      PVA based bonding agent and admixture

      It is a polyvinyl acetate based polyvinyl alcohol suspension used as a surface sealer, bonding agent and admixture for cement and mortar.
      • Bonds to most common construction material except
        PVC rubber and similar products
      • Versitile
      • Enhances adhesion

      TDS (1)

      SDSS (4)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYBOND PVA bonds with almost all kinds of building materials except PVC, rubber and polyethylene. When added with suitable filler, it can be used for fixing plasterboard, ceramic tiles, marbles etc. Bonding Agent Polybond PVA gives mortars, especially topping mortars enhanced bond strength. The wear resistance of screed treated with Polybond PVA is improved than that of a conventional sand and cement screed. The topping will be dust free, wear, water, oil and grease resistant. Available pack size: 5L pails, 20L pails, 200L drums.
      • Bonds to most common construction material except
        PVC rubber and similar products
      • Versitile
      • Enhances adhesion
      • Increases strength
      packshot front imea POLYBIT polybond pva mea
      mea polybit tds polybit polyprime r en mea

      How to Use

      APPLICATION

      As an adhesive for uneven surfaces
      Make a paste of Polybond PVA diluted with equal amount of water, cement and fine sand. The paste can be applied as an adhesive for fixing plaster boards, polystyrene tiles. To ceiling and walls. If the surface is highly porous, apply a primer coat of Polybond PVA mixed with water in the ratio of 1:3.
      As a bonding agent for screeds, plasters and renders
      The surface shall be sound and free from all contaminants, such as oil, grease, paint etc. Sealing of the surface is done with 1 part of Polybond PVA with 3 parts of water. Apply the bonding coat followed by the application of the render, screed or plaster normally. The same method shall be used to bond new to old concrete.
      As an admixture
      For normal to heavy duty flooring, 20-30L of Polybond PVA is the recommended to be admixed with100 kg cement.
      For heavy renderings and cementitious toppings
      Seal and prime the surfaces with Polybond PVA diluted with 3 parts of water. Prepare the render coat with 1 part of ordinary portland cement, 1 part clean washed sand and 1 part of Polybond PVA to 3 parts of clean water. Apply this to the tacky prime coat. 10 to 15L of Polybond PVA per 100 kg cement is recommended. Note: Stir the contents of the product thoroughly, before use

      STORAGE & SHELF LIFE

      Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened condition and if stored as per recommendations. Excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life.

      Frequently asked questions

      This is a PVA based bonding agent

      This can be applied as a coating or by making bonding slurry

      Yes it is green product with very low VOC content

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-mc/SAP_0201VLP34GH0/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete MC

        High strength free flowing micro concrete suitable to repair large volume of concrete repairs at thicknesses from 10mm to 250mm. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-st/SAP_0201VLP34GH1/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete ST

        Polymer modified high strength cementitious repair mortar. Polymer modified repair mortar, specially formulated by blending OPC with non shrinking additives, fibers, polymers and fillers for repairing of beams, columns and slabs. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/fortifiers/product#/polybit-polybond-sbr/SAP_0201VGP34GG6/searchResult.productFields.MainImageAltText}
        POLYBIT Polybond SBR

        SBR based bonding agent and admixture used in mortar and concrete as an admixture and bonding agent to increase its water resistance and durability. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polybond PVA IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited