Skip to Content
Recent searches
      Polybond EP packshot

      Fortifiers

      POLYBIT Polybond EP
      Epoxy primer and bonding agent

      It is an epoxy bonding agent and adhesive for the bonding of new concrete /render to old concrete. It does not shrink and can be applied on slightly damp areas as well.
      • High bonding strength, ultimate bond strength is greater
        than cohesive strength of concrete
      • Moisture tolerant, can be applied on slightly damp
        surfaces
      • Non-shrinking

      TDS (1)

      SDSS (4)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYBOND EP is used for a bonding old to new concrete; repair of concrete; old and worn concrete; glazed tile and bricks; engineered and semi engineered bricks; offshore and marine structures. Available pack size: 1L, 5L kit.
      • High bonding strength, ultimate bond strength is greater
        than cohesive strength of concrete
      • Moisture tolerant, can be applied on slightly damp
        surfaces
      • Non-shrinking
      • High chemical resistance
      • High durability
      • Can be applied in both internal and external areas
      Polybond EP packshot
      Polybond EP packshot

      How to Use

      SUBSTRATE PREPARATION

      All surfaces must be structurally sound and clean. Remove traces of oil, loose particles, laitance, demolding agent, curing compound, grease, paint or bitumen. Smooth surfaces shall be abraded to get a mechanical key. If the concrete surface is not suitable or has disintegrated badly, chip off the degraded areas until a sound surface is obtained. New concrete should be cured until the shrinkage and moisture movement is the minimum.

      APPLICATION

      Pour part ‘B’ hardener to part ‘A’ resin pail and mix thoroughly to get a homogenous color and consistency. Polybond EP may be applied evenly with a short haired brush or with a trowel. Place the screed /concrete or repair mortar immediately after application of Polybond EP to avoid contamination. If the bonding agent dries out, apply a fresh coat.

      STORAGE & SHELF LIFE

      Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened condition and if stored as per recommendations. excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life.

      Frequently asked questions

      This is an epoxy based bonding agent

      This can be applied as a coating or by making bonding slurry

      Yes it is green product with very low VOC content

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/flooring-others/product#/polybit-polysolvent/SAP_0201TZP34GO4/searchResult.productFields.MainImageAltText}
        POLYBIT Polysolvent

        Acid based formulation with quick action to dissolve mortar, cement stains and ingrained dirt on tiles, brick work and concrete surfaces. 
      • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-mc/SAP_0201VLP34GH0/searchResult.productFields.MainImageAltText}
        POLYBIT Polycrete MC

        High strength free flowing micro concrete suitable to repair large volume of concrete repairs at thicknesses from 10mm to 250mm. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polybond EP IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited