Skip to Content

POLYBIT Polypoxy PS

Polysulphide modified epoxy resin based protective coating

  • good corrosion protection
  • non toxic
  • good impact resistance

Features and benefits

Polysulphide modified epoxy resin protective coating designed for superior adhesion, corrosion protection and high chemical resistance for concrete and steel structures.

Properties

Description

POLYBIT® POLYPOXY PS can be used in industrial corrosion protection of steel and concrete structures, hard wearing floor coating in industrial areas, water proofing of potable water structure, protective coating to exposed concrete structures, waterproofing & protection of swimming pools, water tanks etc
Available sizes: 4L, 20L

Documents and downloads

How to use

Surface Preparation

The surface should be free from dust, dirt, curing compound,
oil etc. Clean the surface thoroughly to remove all loosely
adhering particles and cement laitance. It is recommended
to use a light mechanical grinder for cleaning. The concrete
should be sound and any cracks, pot holes shall be repaired
with Polypoxy BF or Polypoxy NF

Application

Prime the prepared surface with Polyprime EP @ 4-5m2/L.
the coating is applied when the primer is in a tacky to
semi-tacky condition. Mix part A (resin) and part B (hardener) separately for
a minute using a slow speed drill fitted with a paddle to
remove any sediment. Apply the coating with a brush, roller or airless spray
(nozzle size 0.4-0.6 mm @2500 psi pressure). 

Finishing

On vertical
surfaces apply the coating at a wet film thickness of 250
microns in a single coat. Since the coating is heavy bodied,
dripping may be observed if it is applied at a higher
thickness. Additional coats can be applied only when
the previous coat dries off completely (8-10 hours). 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
    POLYBIT Polyprime EP
    It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polypoxy-nf/SAP_0201WUP34GK8/searchResult.productFields.MainImageAltText}
    POLYBIT Polypoxy NF
    Easy to use non-flowing, sand filled two component epoxy compound which can be used for bedding, gap filling, repair and adhesive applications. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyguard-pu/SAP_0201WVP34VA3/searchResult.productFields.MainImageAltText}
    POLYBIT Polyguard PU
    A2 component UV stable polyurethane protective coating system. The coating provides a seamless chemical and abrasion resistant coating to cured epoxy systems, metal and concrete surfaces both internal and external. 

Frequently asked questions

Yes. Solvent free epoxy based primer to be used

1L per coat can cover approximately 4 sqm at 250 microns dry film thickness

Yes. It is a non-toxic product complying BS 6920 & suitable for use in contact with drinking water