Skip to Content

POLYBIT POLYPOXY NF 2000

Epoxy repair putty & bedding mortar

  • Easy to use non slumping
  • good impact resistance
  • nor primer or bonding agent required

Features and benefits

Easy to use non-flowing, sand filled two component epoxy compound which can be used for bedding, gap filling, repair and adhesive applications.

Properties

Description

POLYBIT® POLYPOXY NF 2000 easy to use non-flowing, sand filled two component epoxy compound which can be used for bedding, gap filling, repair and adhesive applications.
Available size: 3KG

Documents and downloads

How to use

Surface Preparation

Clean all the surfaces and remove any loose particles, laitance, dust, oil, grease, paint etc. Abrade
the bond area to improve mechanical bond.

Mixing

POLYPOXY NF Part A and Part B shall be mixed thoroughly using a trowel or gloved hand until a uniform color and consistency is achieved. For small mixes, ensure that both the parts are mixed as per
the ratio of 60:40 (A:B). 

Application

Application can be carried out by putty knife, trowel or wooden float. Press firmly to ensure proper adhesion and full contact. Additional build up can be
done by multiple layer application. Thickness can
be from 0mm – 5 mm. The application of additional
layers should follow between 8 – 24 hours after the
first application. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polypoxy-cr/SAP_0201WUP34GK1/searchResult.productFields.MainImageAltText}
    POLYBIT Polypoxy CR
    Solvent free high build epoxy resin protective coating which provides a chemical resistant surface for concrete and steel. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete FC
    Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
    POLYBIT Polyprime EP
    It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 

Frequently asked questions

No primer required

It can be applied up to 5mm/layer

3 kg kit can cover approximately 1.6 sqm at 1mm thickness