POLYBIT Polyguard 101

Acrylic aliphatic protective and anti carbonation coating

  • Highly durable
  • Excellent flexural and elastomeric properties.
  • High UV resistance and resistance to long term weathering effects.

Features and benefits

Acrylic aliphatic based protective and anti carbonation coating for reinforced concrete and masonry surfaces. It consists of a single component pigmented coating ready for immediate site uses.

Properties

Description

POLYBIT® POLYGUARD 101 can be used as a protective coating for exposed concrete structures such as bridge decks, tunnels, reinforced fill panels, marine and coastal structures from chloride ions, sulphates, carbon dioxide and water, used to protect other cementitious and masonry substrates from aggressive marine and coastal environment. Available sizes: 20L.

Documents and downloads

How to use

Surface Preparation

The application temperature should be between 5°C to
45°C. Application procedures may vary slightly depending
upon site conditions. The general recommended guidelines
for the application of the coating system is as follows:
The surface must be structurally sound and free of oil,
grease, dust and other contaminants which will affect
the bonding.

Application

Apply a penetrative primer coat of Polyxane* to the
prepared dry surface. For best results apply the
primer @ 4-5 m²/L/coat. The first coat of Polyguard 101 is to be applied on the dry primer at the rate of 2.5 m2/L for 200 microns D.F.T. the
coating can be applied with a brush, roller or an airless
spray 

Finishing

Apply the second coat at right angles to the first coat at the
same rate. The second coat is to be applied only after the
first is completely dry.
Allow the coating to cure for a period of 7 days to achieve
its full properties 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyxane/SAP_0201WTP34GP1/searchResult.productFields.MainImageAltText}
    POLYBIT Polyxane
    It is a single component highly penetrating protective treatment for concrete, masonry and stone work. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete FC
    Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 

Frequently asked questions

Yes. Solvent free epoxy based primer to be used

It can be applied at a range of 4 to 20mm in single lay.

Yes. This product is highly abrasion resistant