POLYBIT POLYFOAM SS-35

Two component, Spray Polyurethane Foam (SPF) system

  • Spray grade
  • 35kg density

Features and benefits

POLYFOAM SS 35 is an HFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam.

Properties

Description

POLYBIT® POLYFOAM SS 35 is a two-component, spray-applied polyurethane foam that creates a seamless, monolithic barrier against water vapor and air. POLYFOAM SS 35 is an HFC-blown & CFC free, polymeric M.D.I based system for producing rigid urethane foam with a nominal core density of 35 kg/m³ by spray process. The system may be applied to substrates where the surface temperature is of the order of 25 - 30°C. Grades, adjusted in reactivity, are available for both cold and hot condition. Available Pack: 220KG/DRUM

Documents and downloads

How to use

Surface Preparation

The area/substrate were the PolyFoam PU spray system is to be sprayed has to be cleaned
properly and it should be free from dirt, sand and dust moisture, oil and grease and it should be completely
dry.

Mixing

The pump/ plural component proportioner must be capable of supplying each component of the desired 1:1 mixing ratio by volume. Hose heaters should be around 50°C to the spray gun. Applicators should limit PolyFoam Spray thickness to 2.0 cm per pass for optimal processing and physical properties 

Spraying

Start spraying the area until the desired thickness is attained. Give a suitable curing time between each layers to get a good adhesion and good quality foam. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-ss-50/SAP_0201WYP345I0/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFOAM SS-50
    POLYFOAM SS 50 is an HCFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-ss-40a/SAP_0201WYP347A7/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFOAM SS-40A
    PUFOAM SS-40A is an HFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-ss-45a/SAP_0201WYP347A8/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFOAM SS-45A
    PUFOAM SS-45 A is a CFC free, polymeric M.D.I based system to produce rigid polyurethane foam. 

Frequently asked questions

Yes. It is a CFC free system

Spray system

Approximately 15%