POLYBIT POLYFOAM I-50

Two component, polyurethane injection foam system

  • Injection/pouring grade
  • 50kg density

Features and benefits

POLYFOAM I-50 is an HCFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam.

Properties

Description

POLYBIT® POLYFOAM I-50 is a two-component, Injection grade polyurethane foam that creates a seamless, monolithic barrier against water vapor and air. POLYFOAM I-50 is an HCFC-blown & CFC free, polymeric M.D.I based system for producing rigid urethane foam with a nominal core density of 50 kg/m³ by injection/Pouring process. Grades, adjusted in reactivity, are available for both cold and hot condition. Available Pack: 220KG/DRUM

Documents and downloads

How to use

Surface Preparation

Required dimention (L X W X T ) of metal panel (Aluminium or GI) is prepared and placed under the hydraulic press (mold). Spacers are kept between top and bottom sheets.The mold temp: to be maintained around 40°C

Mixing

Ensure machine parameters such as ratio, total out put of mixture (Polyol + MDI) and tempertaure of polyol & MDI are ok. Inject the material in the prepared panel. 

Curing

Give sufficient time for the PU foam to cure. Release the hydrulic pree to demold the panels 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-i-20/SAP_0201WYP345H4/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFOAM I-20
    POLYFOAM I-20 is an HCFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-i-25/SAP_0201WYP345H5/searchResult.productFields.MainImageAltText}
    POLYBIT POLYFOAM I-25
    POLYFOAM I-25 is an HCFC-blown & CFC free, polymeric M.D.I based system to produce rigid Polyurethane foam. 

Frequently asked questions

Yes. It is a CFC free system

Injection/pouring system

Approximately 15%