Skip to Content
Recent searches
      عربي

      POLYBIT POLYFOAM GLUE

      Two component, polyurethane glue system
      • Pouring grade
      • Firm Adhesive

      Features and benefits
      POLYFOAM glue is a polymeric MDI based system for adhesion of rock wool and PU board.

      Properties
      • Pouring grade
      • Firm Adhesive

      Description

      POLYBIT® POLYFOAM Glue is a two-component, polyurethane adhesive that creates a seamless, monolithic barrier against water vapor and air. POLYFOAM glue is HCFC- & CFC free, polymeric M.D.I based system for adhesive purpose. Grades, adjusted in reactivity, are available for both cold and hot condition. Available Pack: 220KG/DRUM

      Documents and downloads

      TDS (1)

      How to use

      Surface Preparation

      The area/substrate were the PolyFoam Glue is to be applied has to be cleaned properly and it should be free from dirt, sand and dust moisture, oil and grease and it should be completely dry.

      Mixing

      Mix component A and Compenent B to 1:1 ratio by volume. 

      Application

      Apply the misture by a roller or brush depending on the area of application. 

      Related articles
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Roofing Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      View all

      Related products
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-mdi/SAP_0201WYP34GP4/searchResult.productFields.MainImageAltText}
        POLYBIT Polyfoam MDI
        Diphenylmethane Diisocyanate. 
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-ss-35/SAP_0201WYP345H8/searchResult.productFields.MainImageAltText}
        POLYBIT POLYFOAM SS-35
        POLYFOAM SS 35 is an HFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam. 
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polyfoam-ss-40a/SAP_0201WYP347A7/searchResult.productFields.MainImageAltText}
        POLYBIT POLYFOAM SS-40A
        PUFOAM SS-40A is an HFC-blown & CFC free, polymeric M.D.I based system to produce rigid polyurethane foam. 

      Frequently asked questions

        Yes. It is a CFC free system

        Pouring system

        Approximately 15%
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT
      عربي

      © 2024 Henkel Polybit Industries