POLYBIT Polyfix RM

PVA based tile adhesive

  • Ready to use, no mixing required.
  • Easy to apply, strong adhesion and economical.
  • Excellent initial grab

Features and benefits

It is a modified polymer based (organic) tile adhesive for thin bed application of ceramic tiles and polystyrene insulation boards to internal surfaces.

Properties

Description

POLYBIT® POYFIX RM is suitable for fixing ceramic tiles in: gypsum, plaster, cement rendering etc; glazed tiles, brick; concrete, block board, gypsum and cement based boards; suitably prepared timber surface; fixing of polystyrene insulation boards. Available pack size: 5L, 20L.

Documents and downloads

How to use

Surface Preparation

The surface to be tiled must be flat, clean, dry and free of oil; grease etc. newly plastered area should be cured completely to develop sufficient strength to hold the weight of the tiles. Board of timber surface must be dry, rigid and flat. Before use stir the Polyfix RM well. Porous cementations substrates, gypsum boards, timber boards shall be treated with penetrating primer, prior to the application of Polyfix RM. Work for a maximum area of 1m2 at a time. Apply the material to the support to a thickness of 3mm forming a horizontal rib with a notched trowel. Start from the bottom or top of the wall. Press the tiles firmly in to the correct position, leaving 1-2 mm space between the tiles for grouting. Wipe off any surplus material immediately with a damp cloth. After a minimum of 24 hours, the tile joints can be grouted with Ceresit CE 33.

Application

Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened conditions and if stored as per recommendations. excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polybond-ac/SAP_0201VGP34GG3/searchResult.productFields.MainImageAltText}
    POLYBIT Polybond AC
    It is a single component, acrylic polymer based emulsion, designed as an admixture for cementitous mortars and screeds and as a bonding and curing agent for concrete and patch repairs. 

Frequently asked questions

It is a PVA based tile adhesive for thin bed application of ceramic tiles

It is compatible with most of the partition boards such gupsum board, plywood, block board,
cement based board & polystyrene insulation board.

It is designed only for internal use.