POLYBIT POLYCOAT RBE

Rubberized bitumen emulsion

  • Cold applied
  • Single component, easy to apply
  • Can be used in both dry and damp substrates

Features and benefits

Emulsified rubber modified bitumen coating, which dries to form a tough, seamless, flexible vapor proof protective coating. Conforms to the requirement of ASTMD 1227 Type lll, class 1.

Properties

Description

POLYBIT® POLYCOAT RBE Can be used for a wide variety of applications, which includes the following: – protective coating on concrete foundations – curing compound on freshly cast concrete structures – dampproof membrane in sandwich constructions – vapor proof barrier coating. Available sizes: 20L, 200L

Documents and downloads

How to use

Surface Preparation

The surface shall be cleaned thoroughly of all contaminants
like dust, traces of curing compound, oil and grease. Light
mechanical high pressure water jet
may be used to clean the surface of all the contaminants
depending on the degree of contamination on the surface
to be coated. All surface imperfections and protrusions
shall be removed and repaired.

Application

It is highly recommended to apply a priming coat prior
to the application of the Polycoat RBE coating on the
substrate. The primer can be applied to damp or
freshly cast concrete surfaces.For highly demanding situations, it
is recommended to apply in multiple coats. On vertical areas, it is recommended
to apply the coating in multiple layers. 

Finishing

Polycoat RBE coating should be protected from getting
damaged. Coating laid on horizontal surfaces can be
protected either by a cement sand screed (50mm thick) or
by an asphaltic protection board (Bituboard)*.
Bituboard can be fixed on the membrane by a double sided
bitumen adhesive tape 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-st/SAP_0201VLP34GH1/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete ST
    Polymer modified high strength cementitious repair mortar. Polymer modified repair mortar, specially formulated by blending OPC with non shrinking additives, fibers, polymers and fillers for repairing of beams, columns and slabs. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete FC
    Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 
  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
    POLYBIT Bituboard
    A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 

Frequently asked questions

Substrate must be sound, free from dust, loose particles, oil, traces of curing coampound and any contamination. May be applied to damp but not waterlogged surfaces.

There is no special primer. Primer can be prepared at site by diluting this product with 20% by volume of clean sweet water.

No. It is a water based green product