As an adhesive for uneven surfaces
Make a paste of Polybond PVA diluted with equal amount of water, cement and fine sand. The paste can be applied as an adhesive for fixing plaster boards, polystyrene tiles. To ceiling and walls. If the surface is highly porous, apply a primer coat of Polybond PVA mixed with water in the ratio of 1:3.
As a bonding agent for screeds, plasters and renders
The surface shall be sound and free from all contaminants, such as oil, grease, paint etc. Sealing of the surface is done with 1 part of Polybond PVA with 3 parts of water. Apply the bonding coat followed by the application of the render, screed or plaster normally. The same method shall be used to bond new to old concrete.
As an admixture
For normal to heavy duty flooring, 20-30L of Polybond PVA is the recommended to be admixed with100 kg cement.
For heavy renderings and cementitious toppings
Seal and prime the surfaces with Polybond PVA diluted with 3 parts of water. Prepare the render coat with 1 part of ordinary portland cement, 1 part clean washed sand and 1 part of Polybond PVA to 3 parts of clean water. Apply this to the tacky prime coat. 10 to 15L of Polybond PVA per 100 kg cement is recommended. Note: Stir the contents of the product thoroughly, before use

Store in a cool, dry place and keep away from all sources of heat and sunlight. In tropical climates, store in air condition rooms. The shelf life is up to 12 months in unopened condition and if stored as per recommendations. Excessive exposure to sunlight, humidity and UV will result in the deterioration of the quality of the product and reduce its shelf life.