Skip to Content
Recent searches
      عربي

      POLYBIT Bitutape TS

      Twin Sided Adhesive Bitumen Tape
      • Self Adhesive

      Features and benefits
      Bitutape TS is a non-reinforced twin side adhesive bitumen membrane which comprises of polymerized bitumen sandwiched between a plastic release film on either side.

      Properties
      • Self Adhesive

      Description

      POLYBIT® BITUTAPE TS is mainly used as an adhesive for the fixing of Bituboard protecting boards to the BITUSTICK range of self adhesive waterproofing membranes. BITUTAPE TS is also ideal for sealing of pipe joints in concrete structures and other corner joints. Available Pack: 10Mx50MMx1.5MM; 10Mx100MMx1.5MM

      Documents and downloads

      TDS (1)

      How to use

      Surface Preparation

      The substrate to which Bitutape tS needs to be applied should be free of oil, water and dust. the presence of any of these contaminants affects the adhesive properties of the membrane. Cut the membrane into the desired width and length and stick it on to the surface. Remove the release film form the order side and then stick the boards on place.

      Related articles
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Roofing Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      View all

      Related products
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-bitustick-p/SAP_0201WAP34GC3/searchResult.productFields.MainImageAltText}
        POLYBIT Bitustick P
        Polymer modified bitumen self adhesive bituminous waterproofing membrane. 
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
        POLYBIT Bituboard
        A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 
      • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/polybit-bitustick/SAP_0201WAP343J0/searchResult.productFields.MainImageAltText}
        POLYBIT BITUSTICK
        Self-adhesive polymer modified bituminous, waterproofing sheet membrane, laminated onto a tough HDPE film on one side and a silicone release film on the other. 

      Frequently asked questions

        Bitutape TS is a twin sided tape

        By butt joint method using Bitutape TS

        Bitutape TS range of tapes have to be stored in a
        shaded area on wooden pallets neatly covered by
        any thick fabric like tarpaulin sheets to ensure no excessive exposure
        to sunlight
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT
      عربي

      © 2024 Henkel Polybit Industries