- Excellent heat resistance
- Single component, easy to apply
- Designed to use in tropical climates
-
Excellent heat resistance
-
Single component, easy to apply
-
Designed to use in tropical climates
-
Can be applied by brush or scrapper
POLYBIT® BITUBOND N is a single component solvent based synthetic rubber adhesive. Used as an adhesive for bonding bitumen fiber boards, bitumen felt, plastic, laminates, veneer boards, rubber and plastic edging strips, rubber, leather, linoleum, felt, cork, foam to wood, chipboard, concrete, stone, metals and bitumen surfaces.
The surface should be free from dust, dirt, curing compound, oil etc. Clean the surface thoroughly to remove
all loosely adhering particles and cement laitance.
Do not use at temperatures below +5°C. Apply an even film of adhesive on both the surfaces with a
strong brush or spreader. The second is to be applied after the first coat dries. The two materials are to be bonded when the
adhesive applied becomes tacky. Next firmly tap the surfaces with a rubber hammer or roll with a pressure roll.
Do not leave the materials coated with the contact adhesive liquid to dry in a draughty damp or dusty space. Supports/props can be used to keep the boards in place till the adhesive is strong enough to hold the board. Adhesive stains can be removed by a cleaning solvent.
This a solvent based sunthetic rubber based adhesive
Yes. This is the recommended adhesive for fixing protection boards on waterproofing membranes
Yes. It has good adhesion