Skip to Content


Polyurethane Adhesive

  • Very high load resistance
  • Moisture- and weather-resistant
  • High coverage

Features and benefits

Very low emission, 2-component polyurethane adhesive.



CERESIT® R710 Very low emission, 2-component polyurethane adhesive for bonding rubber tiles (e.g. Norament), design flooring (LVT), PVC and quartz vinyl tiles, outdoor coverings, concrete and earthenware, polystyrene, wooden materials and building boards on absorbent and nonabsorbent substrates.

Documents and downloads

How to use

Substrate Preparation

Substrates must comply with the requirements of ATV
DIN 18 365 “Flooring work”, BS CP 8203 & 8204 or
compareable national standards. In particular, they must
be clean, free from structural defects, firm, dry and free of
substances which may impair adhesion.


The adhesive consists of two components (resin and
hardener) supplied in separate compartments of the bucket.
Use a sharp pointed tool to punch several holes through
the plastic plug and the bottom of the top container,
which acts as the bucket lid. Lift the top container slightly
to allow the hardener to drain completely into the bucket


Carefully mix the resin and hardener using a
hand drill with stirring attachment for at least 2 minutes.
Apply the adhesive evenly to the subfloor using a suitable
notched trowel. Only apply as much adhesive as can be
laid with floor coverings within the working time. No open
time required. Install the floor coverings directly into the
adhesive bed. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Roofing Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/central-pdp#/ceresit-r-777/SAP_0201TNC015M2/searchResult.productFields.MainImageAltText}
    CERESIT R 777
    Very low-emission dispersion primer used as a bonding bridge for levelling and smoothing compounds on absorbent substrates such as cement screeds and concrete floors. 

Frequently asked questions

This is an epoxy based bonding agent

This can be applied as a coating or by making bonding slurry

Yes it is green product with very low VOC content