Skip to Content

CERESIT CE 33

Cement-based tile grout

  • Smooth surface finish
  • Suitable for wet areas
  • Crack resistant

Features and benefits

Cement-based tile grout for filling narrow and wide joints of 1 to 8mm.

Properties

Description

CERESIT® CE 33 is deisgned for filling joints in floor & wall of ceramic, porcelain,mosaic,natural stone, marble & granite indoor and outdoor areas (like balcony, low height cladding). For narrow and wide joints of 1 to 8 mm. Available pack size: 5kg.

Documents and downloads

How to use

How to use

Surface Preparation

The surface and thin-bed mortar, dispersion adhesive or thick-bed mortar must have set sufficiently hard and dry. Scraped joints must first be wetted. In case of tile coverings with a porous or non scratchproof surface test suitability of CE 33 for grouting.

Application

Pour Ceresit CE 33 in the measured quantity of cold and clean water and mix with an electric mixer until you obtain a homogenous mixture, free of lumps. 1.05-1.15L water for 5kg of Ceresit CE 33 are required for mixing. Mix again after 3 minutes. Fill the joints with the Cerecit CE33 mix using a special grout float or rubber squeegee, without leaving any gaps. Wipe over and clean freshly grouted tiles with a damp sponge. Remove the dry film later with a soft cloth. Dampen the freshly grouted joints after 24 hours to prevent surface moisture deficiency. Floor tiles can be walked on after only 24 hours. Use CE 33 only in dry conditions and at temperatures of 5°C to 40°C. 

Finishing

Store in a cool, dry place and keep away from all sources of heat, sunlight and moisture. The shelf life is 24 months for 5kg foil bag in its original packaging if stored as per recommendations. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/tiling-solutions/flex-adhesives-powder/product#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}
    CERESIT CM 17
    High performance, deformable tile adhesive for indoor and outdoor areas as well as critical substrates. 
  • ${/content/heliux/adhesive/polybit/com/en/products/tiling-solutions/flex-adhesives-powder/product#/ceresit-cm-16/SAP_0201SBC013T8/searchResult.productFields.MainImageAltText}
    CERESIT CM 16
    Flexible polymer modified cementitious tile adhesive with extended open time and high vertical slip resistance. 
Frequently asked questions

Frequently asked questions