Skip to Content
Recent searches
      Polyguard 101 packshot

      Cement slurries flexible

      POLYBIT Polyflex
      Two component, acrylic cementitious waterproofing coating

      A two part acrylic modified cementitious coating for protecting concrete structures against water, vapor, ingress of chloride ions, attacks of acidic gases and alkalis.
      • Flexible - thermal co-efficient of expansion similar to concrete
      • Good adhesion to both, porous and non porous substrates
      • Excellent durability to long term weathering effect and UV

      TDS (1)

      SDSS (22)

      Certificate Public (1)

      Request a consultation
      We have you covered
      Request a consultation

      Product Description

      POLYBIT® POLYFLEX can be used as a waterproofing and protective coating for pile heads, internal lining for potable water reservoirs and other water retaining structures, protection of exposed concrete structures like bridge decks against carbonation and chloride attack, inverted roofs, lift and inspection pits, swimming pools, spillways, backing on marbles and granites to prevent the ingress of moisture, general construction waterproofing, wet area (bathroom, kitchen, balcony, swimming pool and other features), moisture vapor barrier on facade dampproofing.
      Available pack size: 20kg
      • Flexible - thermal co-efficient of expansion similar to concrete
      • Good adhesion to both, porous and non porous substrates
      • Excellent durability to long term weathering effect and UV
      • Resistant to carbon dioxide and chloride ion diffusion
      • Non toxic, therefore suitable for use in potable water applications
      • Suitable for light pedestrian traffic
      Polyflex packshot
      Polyguard 101 packshot

      How to Use

      SURFACE PREPARATION

      The surface must be structurally sound and free of oil,
      grease, dust and other contaminants which will affect
      the bonding. Any structural cracks and potholes shall be
      repaired with a suitable repair mortar from the Polycrete*
      range of repair mortars. The surface to be treated should
      be presaturated with water prior to application. However,
      any standing water shall be removed prior to application.

      MIXING

      Polyflex is supplied in two pre-measured parts which just
      requires on site mixing. Do not mix more material than that
      can be used within the pot life. Part mixing can be carried
      out by mixing 3 parts of powder with 1 part of liquid (by
      weight). Pour the liquid into a suitable container and slowly add the powder to the liquid. Mix the contents using a slow
      speed drill (300-400rpm) fitted to a proprietary paddle
      mixer till a homogenous, lump free and creamy consistency
      is achieved. DO NOT ADD WATER TO DILUTE THE MATERIAL.

      APPLICATION

      It is recommended to apply Polyflex in two coats to provide
      a minimum thickness of 2mm. Each coat shall be applied
      @1.8 kg/m2
      which will give a dry film thickness of 1mm.
      The coating can be applied with a stiff brush or by an airless
      spray of nozzle size of 3-4mm and a pressure of 6-7 bar.
      After the application of the first coat and whilst the coating
      is still wet, embed a glass fibre mesh (Watertite CL 252 or
      similar materials) at all corners and other joints for added
      reinforcement. The second coat shall be applied after the
      first coat dries off completely (6-8 hours @25°C, 50%
      rh). For general protection against carbonation and alkali
      attacks, the coating can be applied in minimum 1mm
      thickness.

      Frequently asked questions

      Yes. This can be applied on damp surface. But not on waterlogged area

      No. Minimum 72 hours curing needed from the last coat.

      Yes. It is a non-toxic product suitable for potable water applications

      Works Well With
      • ${/content/heliux/adhesive/polybit/com/en/products/tiling-solutions/sealing-tapes-membranes-others/product#/polybit-watertite-cl-252/SAP_0201SMP346K9/searchResult.productFields.MainImageAltText}
        POLYBIT WATERTITE CL 252

        Sealing tape for waterproof bridging of expansion joints, pipes, floor drains, corners. 

      Related Articles
      View all
      • Bitustick Cool

        The Next Generation of Performed Bituminous Coatings 
      • Foundations and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Wet Areas and Flooring Systems

        Discover, feel and touch our systems, through our mockup simulation boxes 
      • Polycryl FR

        The Ultimate Fire Rated Coating Solution 
      • Polycryl PF

        Strong UV protection For Polyurethane Foam Roof  
      • Bituplus Ultra

        The Ultimate Torch On Membrane Range 
      Sketch and drafting of a cozy house becoming real

      POLYBIT Polyflex IS PART OF OUR BIM MODELS

      Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
      FIND OUT MORE
      Polybit Logo
      PRODUCTS
      SYSTEMS
      REFERENCES
      INNOVATION
      KNOWLEDGE
      CONTACT
      ABOUT
      SERVICE & SUPPORT

      © 2026 Henkel Polybit Industries Limited